Product Description

Description: A unique feature of this panel is a vertical leg that is a side joint that is mechanically seamed with an electric seamer for a weather tight finish. This panel features concealed clips and easy to handle 16″ wide panels custom cut to the desired length. This panel can be installed directly over purlins or bar joists. It does not require a solid substructure for support. This roof system has several different UL90 construction numbers.

Gauge: 24(Standard) with 22 gauge available on request

Lengths: Maximum 50′(Standard), other lengths are available as special requests

Dimensions: 12″ or 16″ wide by 2″ high

Fasteners: A choice of concealed fastening clips is available for this panel system including UL rated clips. These clips hold the panel firmly in place without unsightly exposed fasteners. Each clip system offers the ability to accommodate thermal movement.

Finish: Galvalume and “Architectural Series”

Manufactured: Houston, Mattoon, Rome, Salt Lake City and Tallapoosa

Usage: This panel is a structural panel that spans up to five feet on purlins, or can be used as an architectural panel over solid deck. This flat panel is designed with striations as an option to minimize oil-canning. It is designed to meet the ever-changing specifications and other industry codes.

Limitations: Recommended for roof slopes of 1/2:12 or greater. Oil canning is not a reason for rejection.

Feature Benefit
1. Factory applied mastic inside of female leg of panel is standard. 1. Watertight & easier erection
2. Swaged end laps 2. Improved erection & improved appearance
3. Optional: Heavier gauges, striation and embossing. 3. Minimizes oil canning.
4. Design flexibility. 4. Optimize economy.
5. Roof runs without end lap panels maybe erected from either direction. 5. Flexible and convenient erection.
6. Roof to wall transition. 6. Creates a trimless eave.
7. 80% less exposed fasteners than traditional side lap panels and all fasteners are long life. 7. Increased weather tightness & improved appearance
8. The side lap has been tested for air infiltration and water penetration under ASTM E283 and E331 methods 8. Minimal air infiltration and water penetration and acceptability among specifiers.
9. Vertical Leg 9. Better transition to hip, valleys, and roof openings
10. Insulated with thermal blocks 10. High energy efficiency system.
11. High or low floating clips available 11. Allows roof to expand an contract maximizing weather tightness.
12. High or low fixed clips available 12. Varying insulation thickness available.
13. Panel available in Royal K-70 paint. 13. 20 year finish warranty
14. UL 90 14. Lower insurance costs
15. Panel has striations 15. Helps with oil canning

Oil-Canning Note: Oil-canning is not considered grounds for rejection of any panel system. Oil-canning can occur in any panel with wide flat sections. Heavier gauge, embossing, striations, flatter sub-frame systems and support from a solid sub-deck can all help to minimize oil-canning.